Fedora как устанавливать драйвер nvidia

Как правильно установить Nvidia драйвер на Fedora 34?

если у меня 400ая серия а я поставлю драйвер на 700ую серию то что будет? или вообще нужно ставить с сайта нвидии?

Первая же ссылка в гугле:

Убейся об стену, вендузоид.

аха, то есть нужно непременно поставить с сайта нвидии? а почему не с репозитории рпмфузион?

я кстати читал данную ссылку ранее

по сути все просто, да, подключить репы и установить всего один пакет — akmod-nvidia и все остальное подтянется
как я понимаю это практически ничем не отличается от того что если поставить драйвер с сайта нвидии(исключение — версия тут немного старше)

rpmfusion следят (и при необходимости патчат) за совместимостью с ядром.

собственно я далек от рпмфузион и вот что сподвигло написать данный вопрос:

1 кто то упоминал что ставил с фюжэн(я подумал есть еще один способ? теперь то я знаю что речь про рпмфюжен))
2 еще способ с нвидии
3 способ с рпмфюжен где четко прописана что нужно ставить akmod-nvidia а уже потом все это копируют другие сайты при этом добавляя туда хеадеры и прочие пакеты которые и так паровозиком пойдут при установке akmod-nvidia-****

RPMFusion предпочтительный способ, т.к. как уже написали выше — они обеспечивают какую-никакую совместимость с ядром. Установка через run файл может однажды после обновления ядра (которые сравнительно часто) закончиться поломкой

понятно, всем спасибо, вопросов больше не имею

Смотря какая видюха. Если старьё то уже начиная с 32 ответ — никак. Новые дрова ее не поддерживают, а старых дров под это ядро нет и не будет. И да, заметил интересную особенность — зависает это ваше нувеё не само по себе, а если модуль установленный в системе (лежащий на диске) опережает текущее ядро в памяти. Почему — хз, эмпирический опыт, не ковырялся.

Или по простому 1. Отключи dnf автоапдейт в кроне либо 2 Почаще перезагружай комп.

Источник

Fedora 35/34/33 NVIDIA [510.39.01 / 495.46 / 470.94 / 390.147 / 340.108] Drivers Install Guide

This is guide, howto install NVIDIA proprietary drivers (manually using .run files) on Fedora 35/34/33/32/31 and disable Nouveau driver. This guide works with GeForce 8/9/200/300/400/500/600/700/800/900/10/20/30 series cards.

• GeForce RTX 30 series cards works with 510.xx, 495.xx, 470.xx, 465.xx and 460.xx NVIDIA drivers, (RTX 3090, RTX 3080 and RTX 3070, RTX 3060, RTX 3060 Ti)
• GeForce RTX 20 series cards works with 510.xx, 495.xx, 470.xx, 465.xx, 460.xx and 450.xx NVIDIA drivers (RTX 2080 Ti, RTX 2080, RTX 2070 Ti, RTX 2070, RTX 2060)
• GeForce GT/GTX 600/700/800/900/10 series cards works with 495.xx, 470.xx, 465.xx, 460.xx, 450.xx and 390.xx NVIDIA drivers (GTX 1080 Ti, GTX 1080, GTX 1070, GTX 1060, GTX 1660 …)
• GeForce GT/GTX 400/500 series cards works with 390.xx NVIDIA drivers
• GeForce GT 8/9/200/300 series cards works with 340.xx NVIDIA drivers

Check video version of guide, Fedora 35 (new version), Fedora 34 and Fedora 33, all works with Fedora 35 / 34 / 33:

I got following question in Youtube:

It’s good question and I decided to add my answer here as well:

Actually nothing, but with manual installation you can control NVIDIA drivers versions as you wish.

You can easily install / change / test / run:

• NVIDIA New Feature Branch (NFB) drivers
• NVIDIA Long Lived Branch (LLB) drivers
• NVIDIA Short Lived Branch (SLB) drivers
• NVIDIA LEGACY drivers
• NVIDIA BETA drivers
• Install NVIDIA drivers with custom patches
• Just stay in some particular NVIDIA version

This is totally different guide than my earlier guides, like Fedora 20 NVIDIA driver install. This guide uses NVIDIA drivers directly from NVIDIA site and dkms to help on kernel updates. I decided go back to old school (and bit ugly) method and install NVIDIA drivers “manually”. I have tested this guide with 340.xx (patched), 390.xx (patched), 418.xx (patched), 435.xx (patched), 450.xx, 460.xx, 465.xx, 470.xx, 495.xx drivers/cards.

With DKMS, you can just update your kernel and your NVIDIA drivers are compiled automatically. If you want to upgrade NVIDIA drivers, then you have to download new installer package from NVIDIA site.

Table of Contents

Let me know, if you have some problems?

Or if you succeed, you could post output of following commands:

Backup first important files before you start installation. And this is of course at your own risk, because graphic cards, components and monitors are different and some combinations might cause totally unexpected results.

1. Before NVIDIA drivers installation

1.1 Check is your NVIDIA card supported

If you see multiple VGA controllers, then check next step and sometimes you might see example Intel VGA controller which have nothing to do with Optimus, normally you can go to BIOS and simply disable it.

1.2 NVIDIA Optimus Technology

If your lspci |grep -E “VGA|3D” output looks like following:

Or you know that your computer have NVIDIA Optimus Technology, and it is impossible to turn Intel Graphics / NVIDIA Optimus off in the BIOS then this guide might not work for you and it’s not tested. You should read this NVIDIA Optimus page first and maybe check Bumblebee Project or NVIDIA XRun Project.

1.3 Disable UEFI Secure Boot or Check Howto Sign NVIDIA Kernel Module

If you have UEFI Secure Boot enabled, then you have to disable Secure Boot or sign your NVIDIA kernel module.

2. Install NVIDIA proprietary drivers on Fedora 35/34/33/32/31 and disable the nouveau driver

2.1 Download NVIDIA Installer Package

Go to http://www.nvidia.com/Download/Find.aspx?lang=en-us and find latest version of installer package. When you use browser this is normally downloaded /home/ /Downloads/NVIDIA-Linux-xxxx.run location.

Tested versions with 5.15+ / 5.14+ / 5.13+ / 5.12+ / 5.11+ / 5.10+ / 5.9+ kernels:

Fedora 35	Fedora 34	Fedora 33	Fedora 32/31
510.39.01 (January 11, 2022)	510.39.01 (January 11, 2022)	510.39.01 (January 11, 2022)	510.39.01 (January 11, 2022)
495.46 (December 13, 2021)	495.46 (December 13, 2021)	495.46 (December 13, 2021)	495.46 (December 13, 2021)
470.94 (December 13, 2021)	470.94 (December 13, 2021)	470.94 (December 13, 2021)	470.94 (December 13, 2021)
465.31 (May 18, 2021)	465.31 (May 18, 2021)	465.31 (May 18, 2021)	465.31 (May 18, 2021)
460.91.03 (July 20, 2021)	460.91.03 (July 20, 2021)	460.91.03 (July 20, 2021)	460.91.03 (July 20, 2021)
435.21 (August 29, 2019)	435.21 (August 29, 2019)	435.21 (August 29, 2019)	435.21 (August 29, 2019)
418.113 (November 5, 2019)	418.113 (November 5, 2019)	418.113 (November 5, 2019)	418.113 (November 5, 2019)
390.147 (December 16, 2021)	390.147 (December 16, 2021)	390.147 (December 16, 2021)	390.147 (December 16, 2021)
340.108 (December 23, 2019)	340.108 (December 23, 2019)	340.108 (December 23, 2019)	340.108 (December 23, 2019)

Note 390.147 users: 390.147 on Fedora 35/34/33 with Kernel 5.15 / 5.14 works without kernel patches.

Note 418.113 and 435.21 users: These are not official NVIDIA LEGACY drivers, but there is example GeForce GTX 1650 Mobile card which is not supported by older or newer drivers. (Download inttf NVIDIA patcher and patch NVIDIA-Linux-x86_64-418.113 and NVIDIA-Linux-x86_64-435.21 for Kernel 5.15 / 5.14 / 5.13 / 5.12 / 5.11 / 5.10)

Note Older Fedora users: If you have any problems with GDM (black screen). You can easily switch Display Manager example to LXDM, LightDM, SDDM or KDM.

2.2 Make NVIDIA installer executable

2.3 Change root user

2.4 Make sure that you system is up-to-date and you are running latest kernel

After update reboot your system and boot using latest kernel:

2.5 Install needed dependencies

2.6 Disable nouveau

2.6.1 Create or edit /etc/modprobe.d/blacklist.conf

Append ‘blacklist nouveau’

2.6.2 Edit /etc/default/grub

Append ‘rd.driver.blacklist=nouveau’ to end of ‘GRUB_CMDLINE_LINUX=”…”‘.

2.6.3 Update grub2 conf

Fedora 35/34

Fedora 33/32/31/30

2.6.4 Remove xorg-x11-drv-nouveau

2.6.5 Generate initramfs

2.7 Reboot to runlevel 3

Note: You don’t have Desktop/GUI on runlevel 3. Make sure that you have some access to end of guide. (Open it on mobile browser, Print it, use lynx/links/w3m, save it to text file).

OR alternatively you can change the runlevel on GRUB2 adding one additional parameter. Quick guide howto change runlevel on GRUB2. If you use this method, then don’t set multi-user.target and don’t set graphical.target on step 2.9 (just reboot).

2.8 Install NVIDIA proprietary drivers for GeForce 6/7 & GeForce 8/9/200/300 & GeForce 400/500/600/700/800/900/10/20 series cards

2.8.1 Log in as root user

Or alternatively change root user (you shouldn’t have nouveau and xorg loaded)

2.8.2 Run NVIDIA Binary

Following command executes driver install routine. Use full file name command if you have multiple binaries on same directory.

2.8.3 NVIDIA Installer Register the Kernel Source Modules with DKMS

2.8.4 NVIDIA Installer 32-bit Compatibility Libraries

2.8.5 NVIDIA Installer Installing Drivers and Building kernel module

Note: If you get libglvnd error, then abort installation and try this. Also “Install and overwrite existing files” works, but fixing this error is more clean way to install NVIDIA Drivers.

2.8.6 NVIDIA Installer Automatic Xorg Config and Backup

2.8.7 NVIDIA Drivers Installation Complete

2.9 All Is Done and Then Reboot Back to Runlevel 5

2.10 VDPAU/VAAPI support

To enable video acceleration support for your player (Note: you need Geforce 8 or later).

3. Some Screenshots Using Different Cards and Drivers

3.1 NVIDIA 465.31 drivers on Fedora 34 Gnome 40 with Kernel 5.12.8

3.2 VIDIA 460.80 drivers on Fedora 34 Gnome 40 with Kernel 5.12.8

3.3 NVIDIA 450.119.03 drivers on Fedora 34 Gnome 40 with Kernel 5.12.8

3.4 NVIDIA 435.21 drivers on Fedora 34 Gnome 40 with Kernel 5.12.8

3.5 NVIDIA 418.113 drivers on Fedora 34 Gnome 40 with Kernel 5.12.8

3.6 NVIDIA 390.143 drivers on Fedora 35 Gnome 41 with Kernel 5.14.11

3.6 NVIDIA 340.108 drivers on Fedora 35 GNOME 41 with Kernel 5.14.9

If you see Black Screen after NVIDIA drivers install, then check following video:

Let me know, if you have problems?

Or if you succeed, you could post output of following commands:

Источник