8723ft роутер мтс драйвера



8723ft роутер мтс драйвера

Характеристики вроде такие!

В сентябре 2019 появился новый «Высокоскоростной 4G LTE Wi-Fi роутер 8723FT», фактически пролетел год с прошлого расширения ассортимента брендированных 4G/Wi-Fi роутеров у оператора МТС. Но в целом новая модель практически не имеет отличий от своих предшественников, кроме отсутствия сети 2G. Это 4G роутер с максимальной скоростью приема данных до 150Мбит/сек. Изготовителем является Shenzhen Xinfengweiye Technology Co., Ltd. Фактическая дата производства 07.2019. Продается по цене 3300 рублей.
На коробке указан как «4G Wi-Fi роутер с раъемом под внешнюю антенну». Как и остальные подобные устройства имеет блокировку использования сим-карт отличных от МТС. Воспользовавшись услугами нашего сайта вы сможете безопасно / без потери гарантии разблокировать сеть роутера. Для этого необходимо приобрести код разблокировки предназначенный именно для вашего устройства.

Технические характеристики:
Стандарты 3G: UMTS 2100 / UMTS 900
Стандарты 4G (LTE): LTE-FDD 1800 МГц (В3)/2600 МГц (В7)/800МГц (В20) LTE-TDD 2600 МГц (B38)
Максимальная скорость загрузки в сети 3G до 21,6 Мбит/с
Максимальная скорость загрузки в сети LTE до 150 Мбит/с
Скорость отправки данных в сети LTE до 50 Мбит/с
Стандарты Wi-Fi: 802.11 b/g/n
Максимальное количество подключаемых устройств: 10

Операционные системы:
Поддержка OC Windows 7, Windows 8, Windows 8.1, Windows 10, Mac OS X 10.8, 10.9, 10.11, 10.12, 10.13.

Доступ к веб интерфейсу:
Адрес: http://192.168.1.1
логин: admin
пароль: admin

Дополнительно:
Поддержка карт памяти MicroSD
Максимальный объем карты памяти 32Гб
Версия ПО: XFNJ_B09P23_F231C_V3.0_SM_MTS_P020

Комплектация:
4G/Wi-Fi-роутер МТС 8723FT
Краткое руководство пользователя
Аккумуляторная батарея: 2100 мАч
Время работы до 6 часов (в зависимости от режима работы)

Сообщение отредактировал VZDD — 27.09.19, 12:23

Это ZTE на чипе ZX297520V3

Как я понимаю, это ответвление EP-N9520 или N95

В дашборде от МТС не работает просмотр СМС.. взможно только у меня, но отлично работает через ZTELink.

MODE:SPI NAND
flag bypass

U-Boot 2011.09 (Jun 05 2019 — 18:34:35) for ZXIC

U-Boot code: 0x27EF0000 -> 0x27F7A3A4 BSS: -> 0x27F8555C

monitor len: 0x00100000

TLB table at: 0x27ff0000

Top of RAM usable for U-Boot at: 0x27ff0000

Reserving 1024k for U-Boot at: 0x27ef0000

Reserving 16k for nand dma buffer at: 0x27eec000

Reserving 2080k for malloc() at: 0x27ce4000

Reserving 24 Bytes for Board Info at: 0x27ce3fe8

Reserving 120 Bytes for Global Data at: 0x27ce3f70

New Stack Pointer is: 0x27ce3f60

Bank #0: 0x20000800 128 MiB

relocation Offset is: 0x00000000

dram_bank_mmu_setup: bank: 0

monitor flash len: 0x0008A3A4

Now running in RAM — U-Boot at: 0x27EF0000

Using default environment

Destroy Hash Table: 27f7a8ac table = (null)

Create Hash Table: N=91

DELETE CANDIDATE: «bootargs»

hdelete: DELETE key «bootargs»

DELETE CANDIDATE: «bootcmd»

hdelete: DELETE key «bootcmd»

INSERT: table 27f7a8ac, filled 1/97 rv 27ce82ec ==> name=»bootdelay» value=»0″

INSERT: table 27f7a8ac, filled 2/97 rv 27ce819c ==> name=»baudrate» value=»115200″

INSERT: table 27f7a8ac, filled 3/97 rv 27ce82bc ==> name=»ethaddr» value=»xx:xx:xx:xx:xx:xx»

INSERT: table 27f7a8ac, filled 4/97 rv 27ce8178 ==> name=»ipaddr» value=»192.168.1.1″

INSERT: table 27f7a8ac, filled 5/97 rv 27ce8550 ==> name=»serverip» value=»192.168.1.20″

INSERT: table 27f7a8ac, filled 6/97 rv 27ce84d8 ==> name=»gatewayip» value=»192.168.1.1″

INSERT: table 27f7a8ac, filled 7/97 rv 27ce834c ==> name=»netmask» value=»255.255.255.0″

INSERT: table 27f7a8ac, filled 8/97 rv 27ce82e0 ==> name=»hostname» value=»unknown»

INSERT: table 27f7a8ac, filled 9/97 rv 27ce8238 ==> name=»bootfile» value=»ZX297520V3.bin»

INSERT: table 27f7a8ac, filled 10/97 rv 27ce852c ==> name=»loadaddr» value=»0x22000000″

INSERT: free(data = 27ce8008)

[UBOOT]NOTICE->[uboot_init_func] go into uboot init func

[UBOOT]NOTICE->[uboot_init_func] uboot init pull on pshold success

[sys_entry_wdt]: watchdog no reset!

[UBOOT]NOTICE->[uboot_init_func] uboot init wdt_reboot success

[UBOOT]NOTICE->[uboot_init_func] uboot init dma success

[UBOOT]NOTICE->[uboot_init_func] uboot init i2c success

adc1 get adc,break num =1 .

[UBOOT]NOTICE->[peripheral_init] zx234502_charger_enable return ret = -103

[UBOOT]NOTICE->[peripheral_init] board_dif = 4

[UBOOT]NOTICE->[peripheral_init] uart1_rxd_gpio_value = 202

[UBOOT]NOTICE->[peripheral_init] uart1_txd_gpio_value = 202

[UBOOT]NOTICE->[prj_lcd_get_info] 128*128 lcd no found,default S93521A init: lcd man_id = 0x0, dev_id=0x0

[UBOOT]NOTICE->[uboot_init_func] uboot init peri success

[SPI-NAND]: maf_id = 0xa1

[SPI-NAND]: dev_id = 0xc1

Bad block table found at page 65280, version 0x01

Bad block table found at page 65216, version 0x01

nand_read_bbt: Bad block at 0x000007fa0000

nand_read_bbt: Bad block at 0x000007fc0000

nand_read_bbt: Bad block at 0x000007fe0000

[UBOOT]NOTICE->[nand_init] 128 MiB.

[UBOOT]NOTICE->[uboot_init_func] uboot init nand success

[UBOOT]NOTICE->[uboot_init_func] uboot init partition success

[zftl_init] is_writed[0] = 4

[zftl_init] is_writed[1] = 20

[zftl_init] is_writed[2] = 1

[UBOOT]ERR->[zftl_init] CanNOT find the partition [-ramdisk-]! ignored

[zftl_init] is_writed[4] = 4

[zftl_init] is_writed[5] = 0

[zftl_init] there is no data in the zftl partition.

[zftl_init] erase the partition form [block 132] to [block 136]

[zftl_init] initialize the three table.

[zftl_init] is_writed[6] = 29

[UBOOT]ERR->[zftl_init] CanNOT find the partition [-simnv-]! ignored

[UBOOT]ERR->[zftl_init] CanNOT find the partition [-simnvfac-]! ignored

[UBOOT]NOTICE->[uboot_init_func] uboot init zftl success

[zftl_read] nand->read( -0x8c8440-, -0x5-)

[UBOOT]NOTICE->[uboot_init_func] uboot init gmac success

[UBOOT]NOTICE->[uboot_init_func] uboot init test success

[UBOOT]NOTICE->[efuse_get_data] secure_flag!=0xFF, SecureVerify->Disable.

[UBOOT]NOTICE->[uboot_init_func] uboot init efuse success

[UBOOT]NOTICE->[boot_reason_init] VALUE = 0x5864765e!

[zftl_read] nand->read( -0x7a1000-, -0x1-)

[zftl_read] nand->read( -0x7a1001-, -0x1-)

[zftl_read] nand->read( -0x9c0000-, -0x20-)

[zftl_read] nand->read( -0x9c0020-, -0x20-)

[UBOOT]NOTICE->[uboot_init_func] uboot init boot_reason success

[UBOOT]NOTICE->[uboot_init_func] uboot init wdt success

[UBOOT]NOTICE->[get_battery_detect_flag] part offset = 0x600000

[zftl_read] nand->read( -0x7b4d00-, -0x1-)

adc2 get adc,break num =1 .

adc1 get adc,break num =1 .

[UBOOT]NOTICE->[uboot_init_func] uboot init bat_det success

[UBOOT]NOTICE->[uboot_init_func] uboot init boot_prepare success

[UBOOT]NOTICE->[boot_entry] Normal entry!

[UBOOT]NOTICE->[load_zsp_image] [cpuzsp] [size=0x3ce6b2] from [0xa00000] to [0x25000000]

[UBOOT]NOTICE->[load_zsp_image] [loading. ] ——————— takes [77951] us.

[UBOOT]NOTICE->[reform_zsp_image] move zsp to dest addr start

[UBOOT]NOTICE->[reform_zsp_image] move zsp to dest addr end

[UBOOT]NOTICE->[load_arm_image_ps] (cpups) Size=0x50c020, Load From 0x1100000 -> 0x25400000.

[UBOOT]NOTICE->[load_arm_image_ps] (cpups) CRC Checksum=0x45f52f8d.

[UBOOT]NOTICE->[load_arm_image_ps] (cpups) load image finished

[UBOOT]NOTICE->[load_arm_image_ps] (cpups) Skip Secure Verify.

[UBOOT]NOTICE->[arm_image_crc_calc] (cpups)CRC Calculate start

[UBOOT]NOTICE->[arm_image_crc_calc] (cpups) CRC Calculate Res=0x45f52f8d, Size=5292064 Bytes

[UBOOT]NOTICE->[arm_image_crc_calc] (cpups) CRC Check PASS!

[UBOOT]NOTICE->[load_arm_image_linux] (cpuap) Size=0x3612e0, Load From 0x1900000 -> 0x20007fc0.

[UBOOT]NOTICE->[load_arm_image_linux] (cpuap) CRC Checksum=0xa6531362.

[UBOOT]NOTICE->[load_arm_image_linux] (cpuap)load image finished

[UBOOT]NOTICE->[load_arm_image_linux] (cpuap) Skip Secure Verify.

[UBOOT]NOTICE->[arm_image_crc_calc] (cpuap)CRC Calculate start

[UBOOT]NOTICE->[arm_image_crc_calc] (cpuap) CRC Calculate Res=0xa6531362, Size=3543776 Bytes

[UBOOT]NOTICE->[arm_image_crc_calc] (cpuap) CRC Check PASS!

### main_loop entered: bootdelay=0

### main_loop: bootcmd=» bootm 0x20007fc0″

## Current stack ends at 0x27ce3dd0 * kernel: cmdline image address = 0x20007fc0

## Booting kernel from Legacy Image at 20007fc0 .

Image Name: Linux-3.4.110

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 3543776 Bytes = 3.4 MiB

Load Address: 20008000

Entry Point: 20008000

Verifying Checksum . len = 3612e0,dcrc = a6531362,cal=a6531362

kernel data at 0x20008000, len = 0x003612e0 (3543776)

## No init Ramdisk

ramdisk start = 0x00000000, ramdisk end = 0x00000000

XIP Kernel Image . OK

kernel loaded at 0x20008000, end = 0x203692e0

images.os.start = 0x20007FC0, images.os.end = 0x203692e0

images.os.load = 0x20008000, load_end = 0x203692e0

## Transferring control to Linux (at address 20008000) .

[UBOOT]NOTICE->[start_other_cores] Starting the arm_r7 .

Uncompressing Linux. done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0

[ 0.000000] Linux version 3.4.110 ([email protected]) (gcc version 4.7.2 (Buildroot 2013.02) ) #2 Fri Jul 19 16:31:55 CST 2019

[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c53c7d

[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[ 0.000000] Machine: ZTE-TSP ZX297520V3

[ 0.000000] Memory policy: ECC disabled, Data cache writeback

[ 0.000000] softspinlock init success base=0xf83029c0!

[ 0.000000] [CLK] zx29 tsp clk init ok.

[ 0.000000] [PCU] PCU_INIT begin.

[ 0.000000] [PCU] PCU_INIT end.

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 14478

[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)

[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Memory: 57MB = 57MB total

[ 0.000000] Memory: 49676k/49676k available, 8692k reserved, 0K highmem

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 — 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xfff00000 — 0xfffe0000 ( 896 kB)

[ 0.000000] vmalloc : 0xc4000000 — 0xff000000 ( 944 MB)

[ 0.000000] lowmem : 0xc0000000 — 0xc3900000 ( 57 MB)

[ 0.000000] modules : 0xbf000000 — 0xc0000000 ( 16 MB)

[ 0.000000] .text : 0xc0008000 — 0xc064e0d8 (6425 kB)

[ 0.000000] .init : 0xc064f000 — 0xc0674000 ( 148 kB)

[ 0.000000] .data : 0xc0674000 — 0xc06cdfc0 ( 360 kB)

Читайте также:  Hp photosmart c4500 all in one скачать драйвера

[ 0.000000] .bss : 0xc06cdfe4 — 0xc07e9738 (1134 kB)

[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[ 0.000000] [GIC]ZTE-TSP zx29 GIC initialized.

[ 0.000000] ce_wclk=3250000, parent=main_clk_26m

[ 0.000000] cs_wclk=32768, parent=main_clk_32k

[ 0.000000] sched_clock: 31 bits at 32kHz, resolution 30517ns, wraps every 65535999ms

[ 0.000000] cd_wclk=26000000, parent=main_clk_26m

[ 0.000000] wt_wclk=32768, parent=main_clk_32k

[ 0.000000] ZTE-TSP zx297520v system timer initialized

[ 0.000000] console [ttyS1] enabled

[ 0.000000] [UART]register_console: zx29 console registered!

[ 0.000000] kmemleak: Kernel memory leak detector disabled

[ 0.257873] Calibrating delay loop. 1241.08 BogoMIPS (lpj=3102720)

[ 0.291046] pid_max: default: 32768 minimum: 301

[ 0.295776] Mount-cache hash table entries: 512

[ 0.300659] CPU: Testing write buffer coherency: ok

[ 0.305145] hw perfevents: no hardware support available

[ 0.310333] Setting up static identity map for 0x204b5cb0 — 0x204b5d08

[ 0.319213] NET: Registered protocol family 16

[ 0.323455] gpiochip_add: registered GPIOs 0 to 135 on device: zx29_gpio

[ 0.328918] [GPIO]create sysfs interface

[ 0.332794] [GPIO]ZTE-TSP zx29 GPIO initialized

[ 0.438354] buck3v3 on, wifi power up.

[ 0.511566] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[ 0.518127] hw-breakpoint: maximum watchpoint size is 8 bytes.

[ 0.555633] bio: create slab at 0

[ 0.561645] [DMA]ZTE-TSP zx297520v2 DMA initialized

[ 0.565948] SCSI subsystem initialized

[ 0.569641] [PMU] get boot_reason = 0 from 0xf8302bc0.

[ 0.582824] zx234290_PMU_regulator_init, BUCKFail_irq=118,LDOFail_irq=117

[ 0.589477] zx29_i2c zx29_i2c.0: i2c-0: ZX29 I2C adapter

[ 0.593994] zx29_i2c zx29_i2c.1: i2c-1: ZX29 I2C adapter

[ 0.599487] rpmsg: icp_probe actorID = 0, success!

[ 0.604003] [zxp] icp_wake_lock inited!

[ 0.607421] rpmsg: icp_probe actorID = 1, success!

[ 0.613098] NET: Registered protocol family 8

[ 0.616546] NET: Registered protocol family 20

[ 0.621582] cfg80211: Calling CRDA to update world regulatory domain

[ 0.628143] Switching to clocksource zx29_ap_timer3

[ 0.634216] NET: Registered protocol family 2

[ 0.645843] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.651641] TCP established hash table entries: 2048 (order: 2, 16384 bytes)

[ 0.658325] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.664642] TCP: Hash tables configured (established 2048 bind 2048)

[ 0.670928] TCP: reno registered

[ 0.674163] UDP hash table entries: 256 (order: 0, 4096 bytes)

[ 0.679992] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[ 0.686431] NET: Registered protocol family 1

[ 0.691680] [xxx] softspinlock dev inited!

[ 0.705932] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

[ 0.711212] msgmni has been set to 97

[ 0.715545] io scheduler noop registered

[ 0.718139] io scheduler deadline registered (default)

[ 0.723419] ##leadt15ds26_spi_init, line:1478[LCD][LEAD]spi_register_driver — leadt15ds26_spi.

[ 0.733795] [zx29_uart_probe][2616]UART DMA is OPENED1

[ 0.737518] ttyS1 at MMIO 0x1408000 (irq = 108) is a zx29_UART

[ 0.743591] ZTE-TSP zx29 UART_1 probe OK

[ 0.747344] ZTE-TSP zx29 UART driver registered

[ 0.759796] brd: module loaded

[ 0.765716] loop: module loaded

[ 0.768707] Generic platform RAM MTD, (c) 2004 Simtec Electronics

[ 0.777587] [SPIFC]dma ok addr is 2357c480

[ 0.781250] gpio,clk ,spifc en ok

[ 0.784606] [SPIFC]request_irq ok

[ 0.787902] spi-nand-dt spi-nand-dt: maf = a1,dev = c1

[ 0.792999] spi_nand wakelock ok

[ 0.796234] [SPI-NAND]: maf_id = 0xa1

[ 0.799926] [SPI-NAND]: dev_id = 0xc1

[ 0.803680] [SPI-NAND]: maf_id = 0xa1

[ 0.807403] [SPI-NAND]: dev_id = 0xc1

[ 0.811126] [SPI-NAND]: maf_id = 0xa1

[ 0.814880] [SPI-NAND]: dev_id = 0xc1

[ 0.818603] NAND device: Manufacturer ID: 0xa1, Chip ID: 0xc1 (Parogon SPINAND 128MiB 1,8V 8-bit)

[ 0.827453] 1 NAND maxchips chips detected

[ 0.831542] [SPI-NAND][A0] = 0x0

[ 0.834777] [SPI-NAND][B0] = 0x11

[ 0.839172] Bad block table found at page 65280, version 0x01

[ 0.845123] Bad block table found at page 65216, version 0x01

[ 0.849853] nand_read_bbt: bad block at 0x000007fa0000

[ 0.854644] nand_read_bbt: bad block at 0x000007fc0000

[ 0.859771] nand_read_bbt: bad block at 0x000007fe0000

[ 0.864990] 18 cmdlinepart partitions found on MTD device spi-nand

[ 0.871063] Creating 18 MTD partitions on «spi-nand»:

[ 0.876098] 0x000000000000-0x000000080000 : «zloader»

[ 0.882293] 0x000000080000-0x000000180000 : «uboot»

[ 0.887023] 0x000000180000-0x000000200000 : «cpurpm»

[ 0.892089] 0x000000200000-0x000000300000 : «uboot-mirr»

[ 0.897308] 0x000000300000-0x000000400000 : «nvfac»

[ 0.902221] 0x000000400000-0x000000600000 : «nvro»

[ 0.907012] 0x000000600000-0x000000900000 : «nvrw»

[ 0.911804] 0x000000900000-0x000000a00000 : «fotaflag»

[ 0.916198] zftl[0] is fotaflag

[ 0.921813] 0x000000a00000-0x000001080000 : «cpuphy»

[ 0.926391] 0x000001080000-0x000001100000 : «sms»

[ 0.931060] 0x000001100000-0x000001900000 : «cpups»

[ 0.935974] 0x000001900000-0x000001e00000 : «cpuap»

[ 0.940826] 0x000001e00000-0x000002200000 : «cpfs»

[ 0.945617] 0x000002200000-0x000002700000 : «recovery»

[ 0.950775] 0x000002700000-0x000002c00000 : «recovery-kernel»

[ 0.956512] 0x000002c00000-0x000003200000 : «cdrom»

[ 0.960662] zftl[1] is cdrom

[ 0.973876] 0x000003200000-0x000007700000 : «userdata»

[ 0.978668] 0x000007700000-0x000007d00000 : «securefs»

[ 0.984161] UBI: attaching mtd16 to ubi0

[ 0.986755] UBI: physical eraseblock size: 131072 bytes (128 KiB)

[ 0.992889] UBI: logical eraseblock size: 129024 bytes

[ 0.998229] UBI: smallest flash I/O unit: 2048

[ 1.002929] UBI: sub-page size: 512

[ 1.007537] UBI: VID header offset: 512 (aligned 512)

[ 1.013336] UBI: data offset: 2048

[ 1.195983] UBI: max. sequence number: 1716

[ 1.207397] UBI: attached mtd16 to ubi0

[ 1.209808] UBI: MTD device name: «userdata»

[ 1.214996] UBI: MTD device size: 69 MiB

[ 1.219848] UBI: number of good PEBs: 552

[ 1.224456] UBI: number of bad PEBs: 0

[ 1.228881] UBI: number of corrupted PEBs: 0

[ 1.233306] UBI: max. allowed volumes: 128

[ 1.237915] UBI: wear-leveling threshold: 4096

[ 1.242584] UBI: number of internal volumes: 1

[ 1.247009] UBI: number of user volumes: 1

[ 1.251464] UBI: available PEBs: 0

[ 1.255889] UBI: total number of reserved PEBs: 552

[ 1.260742] UBI: number of PEBs reserved for bad PEB handling: 15

[ 1.266815] UBI: max/mean erase counter: 7/3

[ 1.271087] UBI: image sequence number: 660560690

[ 1.275909] UBI: background thread «ubi_bgt0d» started, PID 578

[ 1.284912] spi:master =c356dc00

[ 1.288299] zx29_ssp zx29_ssp.0: setup for DMA on RX dma0chan5, TX dma0chan4

[ 1.295379] spi:zx29_spi_probe OK

[ 1.298614] tun: Universal TUN/TAP device driver, 1.6

[ 1.303466] tun: (C) 1999-2004 Max Krasnyansky

[ 1.309814] PPP generic driver version 2.4.2

[ 1.314208] PPP BSD Compression module registered

[ 1.318572] PPP Deflate Compression module registered

[ 1.324005] PPP MPPE Compression module registered

[ 1.328399] NET: Registered protocol family 24

[ 1.332855] [rtw_suspend_lock_init] ENTRY

[ 1.336883] Realtek WLAN driver — version 1.7 (2018-08-22)

[ 1.342376] Adaptivity function — version 9.1

[ 1.346710] wlan_index:0 1, 10,0x8179024c,0x0,0

[ 1.354614] ======== at_cdev_init 1

[ 1.362213] usb,zx29_hsotg: version 3.10b 20-MAY-2013

[ 1.574279] Core Release: 3.20a

[ 1.575927] Setting default values for core params

[ 1.582946] Using Descriptor DMA mode

[ 1.585113] Periodic Transfer Interrupt Enhancement — disabled

[ 1.590942] Multiprocessor Interrupt Enhancement — disabled

[ 1.596496] OTG VER PARAM: 0, OTG VER FLAG: 0

[ 1.600921] Dedicated Tx FIFOs mode

[ 1.614990] usb,#### gadget name:dwc_otg_pcd

[ 1.619567] gadget: Mass Storage Function, version: 2009/09/11

[ 1.625274] gadget: Number of LUNs=2

[ 1.628906] lun0: LUN: removable read only CD-ROM file: (no medium)

[ 1.635253] lun1: LUN: removable file: (no medium)

[ 1.640136] gadget: android_usb ready

[ 1.645111] usb,kset test init!

[ 1.653839] zx234290-rtc zx234290-rtc: rtc core: registered zx234290 as rtc0

[ 1.665069] i2c /dev entries driver

[ 1.667663] charger probe.

[ 1.677795] get adc,break num =1 .

[ 1.687774] get adc,break num =1 .

[ 1.697784] get adc,break num =1 .

[ 5.697814] zx29_i2c zx29_i2c.1: cannot get bus (error -110)

[ 5.701995] zx234502-charger 1-0013: zx234502_hw_init ERROR: -11

[ 5.708007] zx234502_probe Hardware init failed times = 1

[ 9.712829] zx29_i2c zx29_i2c.1: cannot get bus (error -110)

[ 9.717010] zx234502-charger 1-0013: zx234502_hw_init ERROR: -11

[ 9.722991] zx234502_probe Hardware init failed times = 2

[ 13.727844] zx29_i2c zx29_i2c.1: cannot get bus (error -110)

[ 13.731994] zx234502-charger 1-0013: zx234502_hw_init ERROR: -11

[ 13.738006] zx234502_probe Hardware init failed times = 3

[ 13.743377] zx234502_hw_init error 11111!!

[ 13.747467] go to zx234500_prob!!

[ 13.750762] uart1_txd_gpio_value is 1.

[ 13.754486] uart1_rxd_gpio_value is 1.

[ 13.758514] board_dif is 4.

[ 13.761047] eta4056_charger_probe start!!

[ 13.772979] get adc,break num =1 .

[ 13.782958] get adc,break num =1 .

[ 13.792968] get adc,break num =1 .

[ 13.802978] get adc,break num =1 .

[ 13.812957] get adc,break num =1 .

[ 13.822967] get adc,break num =1 .

[ 13.845611] init usb out

[ 13.846649] dwc_otg_usb_chg_remove,usb device has alreadly plugout

[ 13.872894] chg gpio error ret = 0

[ 13.875122] board_dif is 4

[ 13.877929] spi_register_board_info success,devices_num=1

[ 13.883026] spi spi0.0: DMA mode set in controller state

[ 13.888549] ##leadt15ds26fb_probe, line:1250[LCD][LEAD]leadt15ds26fb_probe in.

[ 13.895568] ##leadt15ds26fb_init_gpio, line:507request lcd_reset failed

[ 13.904785] spi_register_board_info success,ret=0

[ 13.908599] input: zx29_keypad_int as /devices/virtual/input/input0

[ 13.915100] kpd request_irq irq_num=122.

[ 13.918365] get adc,break num =1 .

[ 13.927886] kpd request_irq irq_num=83.

[ 13.930358] get adc,break num =1 .

[ 13.937866] kpd request_irq irq_num=82.

[ 13.940246] wifi enable gpio success low85

[ 13.944671] get adc,break num =1 .

[ 13.948028] i2c-core: driver [zx234502-charger] using legacy suspend method

[ 13.954833] i2c-core: driver [zx234502-charger] using legacy resume method

[ 13.962066] [WDT]Watchdog Timer init OK.

[ 13.965759] [zx soft wdt]: Success to create AP 2 M0 icp channel 2 used by soft wdt.

[ 13.973602] rpmsg: actorID = 0 chID = 2 register callback success!

Читайте также:  Сетевой контроллер драйвер для тошиба сателлит

[ 13.979736] [zx soft wdt]: Success to register icp callback.

[ 13.985992] [zx soft wdt]: Success to register miscdev.

[ 13.991210] [zx soft wdt]: Success to create and run soft wdt thread.

[ 13.997833] cpuidle: using governor ladder

[ 14.001861] cpuidle: using governor menu

[ 14.005920] ZXWDT Global Count = 15, time=13677656us

[ 14.010833] mmc,ZX29 Multimedia Card Interface Driver

[ 14.015930] dw_mci_pltfm_register: host0 step 1 finish, reg addr f8610000

[ 14.022583] zx29_sd zx29_sd.0: Using internal DMA controller.

[ 14.028289] zx29_sd zx29_sd.0: Version ID is 210a

[ 14.033172] mmc,dw_mci_strengthen_driver, 3606: clkcmd:0x38383858 data:0x38583838

[ 14.041931] mmc,dw_mci_strengthen_driver, 3619: clkcmd:0x3939395a data:0x38583939

[ 14.050872] zx29_sd zx29_sd.0: DW MMC controller at irq 44, 32 bit host data width, 512 deep fifo

[ 14.061157] zx29_sd zx29_sd.0: 1 slots initialized

[ 14.064636] dw_mci_pltfm_register: host1 step 1 finish, reg addr f8611000

[ 14.071289] zx29_sd zx29_sd.1: Using internal DMA controller.

[ 14.076995] zx29_sd zx29_sd.1: Version ID is 210a

[ 14.081695] zx29_sd zx29_sd.0: Using internal DMA controller.

[ 14.087554] zx29_sd zx29_sd.1: DW MMC controller at irq 43, 32 bit host data width, 1024 deep fifo

[ 14.097961] zx29_sd zx29_sd.1: 1 slots initialized

[ 14.101348] get adc,break num =1 .

[ 14.123138] get adc,break num =1 .

[ 14.125335] [RPMSG] LOG_INIT

[ 14.128540] [xxx] efuse dev inited!

[ 14.132354] [check privateip]zte_check_privateip_module_init register start.

[ 14.139038] GACT probability NOT on

[ 14.142456] Failed to load ipt action

[ 14.150238] netem: version 1.3

[ 14.151855] u32 classifier

[ 14.154541] Performance counters on

[ 14.158355] input device check on

[ 14.161987] Actions configured

[ 14.165374] Netfilter messages via NETLINK v0.30.

[ 14.170104] nfnl_acct: registering with nfnetlink.

[ 14.174865] nf_conntrack version 0.5.0 (776 buckets, 4832 max)

[ 14.181121] get adc,break num =1 .

[ 14.184753] ctnetlink v0.93: registering with nfnetlink.

[ 14.190063] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 14.194976] TCP: cubic registered

[ 14.198120] Initializing XFRM netlink socket

[ 14.203857] NET: Registered protocol family 10

[ 14.207794] ip6_tables: (C) 2000-2006 Netfilter Core Team

[ 14.212402] IPv6 over IPv4 tunneling driver

[ 14.218994] NET: Registered protocol family 17

[ 14.222015] NET: Registered protocol family 15

[ 14.226531] Bridge firewalling registered

[ 14.230407] Ebtables v2.0 registered

[ 14.234008] 8021q: 802.1Q VLAN Support v1.8

[ 14.238525] [DEBUG] create zte sysfs interface OK.

[ 14.242919] [DEBUG] create test sysfs interface OK.

[ 14.247741] [DEBUG] create test clk sysfs interface OK.

[ 14.252990] [DEBUG] create test icp sysfs interface OK.

[ 14.259033] kmemleak: Kernel memory leak detector initialized

[ 14.263977] rpmsg: actorID = 1 chID = 10 register callback success!

[ 14.270172] Ramdump server init success!

[ 14.283172] Ramdump maybe happens before collect server init done, please check!

[ 14.296112] zx234290-rtc zx234290-rtc: setting system clock to 2019-09-29 13:16:41 UTC (1569763001)

[ 14.305419] [SLP] Power/PM_INIT

[ 14.307189] [SLP] Power/SPM_INIT

[ 14.310485] [SLP] Power/PM_CONTEXT_INIT

[ 14.314392] [SLP] Power/WAKEUP_ADDRESS

[ 14.318237] [SLP] alloc size: 32 Bytes , total size 32 Bytes

[ 14.323852] [SLP] alloc size: 2592 Bytes , total size 2624 Bytes

[ 14.329864] [SLP] alloc size: 96 Bytes , total size 2720 Bytes

[ 14.335662] [SLP] alloc size: 32 Bytes , total size 2752 Bytes

[ 14.341491] [SLP] alloc size: 128 Bytes , total size 2880 Bytes

[ 14.347381] [SLP] alloc size: 64 Bytes , total size 2944 Bytes

[ 14.353210] [SLP] alloc size: 60 Bytes , total size 3004 Bytes

[ 14.359008] [SLP] alloc size: 64 Bytes , total size 3068 Bytes

[ 14.364837] [SLP] alloc size: 128 Bytes , total size 3196 Bytes

[ 14.370758] [SLP] alloc size: 128 Bytes , total size 3324 Bytes

[ 14.376647] [SLP] alloc size: 288 Bytes , total size 3612 Bytes

[ 14.382568] [SLP] alloc size: 64 Bytes , total size 3676 Bytes

[ 14.388366] [SLP] alloc size: 96 Bytes , total size 3772 Bytes

[ 14.394195] [SLP] alloc size: 128 Bytes , total size 3900 Bytes

[ 14.400085] [SLP] alloc size: 64 Bytes , total size 3964 Bytes

[ 14.405914] [SLP] alloc size: 352 Bytes , total size 4316 Bytes

[ 14.411804] [SLP] alloc size: 64 Bytes , total size 4380 Bytes

[ 14.417633] [SLP] alloc size: 32 Bytes , total size 4412 Bytes

[ 14.423461] [SLP] Power/PM_CONTEXT_INIT END

[ 14.427612] [SLP] Power/SRAM_INIT

[ 14.430999] [SLP] create sysfs interface

[ 14.434967] rpmsg: actorID = 1 chID = 1 register callback success!

[ 14.441101] [SLP] pm_mask_info=( 0)

[ 14.445190] [CPUIDLE] register device OK

[ 14.450378] [CPUFREQ] zx29_cpufreq_init ok

[ 14.454711] [CPUFREQ] get_cpu_rate: 624000

[ 14.458801] [CPUFREQ] zx_cpufreq_cpu_init cpu: 0, target_freq:624000

[ 14.465301] [CPUFREQ] register cpufreq driver OK!

[ 14.469818] [TSC] create sysfs[ 14.510528] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 50000000Hz, actual 50000000HZ div = 1)

[ 14.519622] UBIFS: recovery needed

[ 14.527679] offset=0x0, size=0x80000

[ 14.531250] offset=0x80000, size=0x100000

[ 14.535247] offset=0x180000, size=0x80000

[ 14.539245] offset=0xa00000, size=0x680000

[ 14.543334] offset=0x1100000, size=0x800000

[ 14.547485] offset=0x1900000, size=0x500000

[ 14.551666] offset=0x1e00000, size=0x400000

[ 14.555816] offset=0x2c00000, size=0x600000

[ 14.640319] UBIFS: recovery completed

[ 14.642608] UBIFS: mounted UBI device 0, volume 0, name «rootfs»

[ 14.648529] UBIFS: file system size: 67350528 bytes (65772 KiB, 64 MiB, 522 LEBs)

[ 14.656158] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)

[ 14.663452] UBIFS: media format: w4/r0 (latest is w4/r0)

[ 14.669281] UBIFS: default compressor: zlib

[ 14.673431] UBIFS: reserved for root: 0 bytes (0 KiB)

[ 14.680908] new ubifs_mount 40008410

[ 14.683410] VFS: Mounted root (ubifs filesystem) on device 0:10.

[ 14.689544] Freeing init memory: 148K

[ 14.692993] Write protecting the kernel text section c0008000 — c0629000

[ 14.714691] mmc0: new high speed SDIO card at address 0001

[ 14.731170] rtw_drv_init: sdio_func_id is «mmc0:0001:1»

[ 14.734954] =====>>INSIDE rtl8192cd_init_one >EXIT rtl8192cd_init_one >INSIDE rtl8192cd_init_one >EXIT rtl8192cd_init_one >INSIDE rtl8192cd_init_one >EXIT rtl8192cd_init_one >INSIDE rtl8192cd_init_one >EXIT rtl8192cd_init_one : ddrnet_open

[ 19.404785] ddrnet.c : ddrnet_open wan1

[wlan][translateStringToEcho-641[ 19.419250] ddrnet.c : ddrnet_icp_receive_thread, lan = 0, actor_id = 1, channel_id = 3

19.30 12.68
net_pdp_act_proc success
mainctrl received msg usMsgCmd=0x159d, src=0x100f
mainctrl received msg usMsgCmd=0x1020, src=0x1016
proc_wan_change_v4 start!
set default_wan_name = wan1
proc_wan_change_v4 old:, now:wan1!
netapi:getDevId_byname start!dev_name=wan
net_default_wan_proc dev_id:0
[13:16:46]init.shstarttttttttttttttttt
init_usblog_mode
ZCAT_FACTORY_PATH : 3
open usb_log_dev 8
tty_set_port ok.
rpmsg: ap port open fd = 8
init_monitor_usb_enum hotplug_sock 9
hb2017 begin recv usb msg
realtek rtl_get_available_wlan
realtek rtl_start_wlan_if
Initialize wlan0 interface
iwpriv wlan0 set_mib vap_enable=1
>>
wlan0 config para
IS_ROOT_WLAN is 1
/wifi/realtek/rtl8192c/wlan0/wlan_disabled =0
/wifi/realtek/rtl8192c/wlan0/wlan_mode =0
iwpriv wlan0 set_mib hwaddr=12345678ffbb
set RF parameters
ZTE_MMI mmi_getLedNetInfo netmode = 3, con_sta = 1,i = 4,ledsta = 0
wifi_lte_intr=1 iwpriv wlan0 set_mib ch_low=5
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
Set 11n parameter
[ 20.317901] int data: 1

wpa relative settings
Initialize wlan0-va0 interface
>>
wlan0-va0 config para
IS_ROOT_WLAN is 0
/wifi/realtek/rtl8192c/wlan0-va0/wlan_disabled =0
/wifi/realtek/rtl8192c/wlan0-va0/wlan_mode =0
iwpriv wlan0-va0 set_mib hwaddr=XXXXXXXXXXXX
set RF parameters
Set 11n parameter
route: SIOCDELRT: No such process
ZTE_MMI mmi_getLedNetInfo netmode = 3, con_sta = 1,i = 4,ledsta = 0
[ 20.970336] int data: 1

wpa relative settings
Initialize wlan0-va1 interface
>>
Info: tc_tbf up 1 start
wlan0-va1 config para
IS_ROOT_WLAN is 0
/wifi/realtek/rtl8192c/wlan0-va1/wlan_disabled =1
tc_enable=0
/wifi/realtek/rtl8192c/wlan0-va1/wlan_mode =0
iwpriv wlan0-va1 set_mib hwaddr=XXXXXXXXXXXX
21.00 12.68
proc_wan_change_v4 data ok, defwan_change:1
===============init firewall===================
set RF parameters
dnsmasq: using nameserver 213.87.0.1#53
dnsmasq: using nameserver 213.87.1.1#53
Set 11n parameter
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
[ 21.735290] int data: 1

iptables: No chain/target/match by that name.
wpa relative settings
iptables: No chain/target/match by that name.
Initialize wlan0-vxd interface
>>
iptables: No chain/target/match by that name.
wlan0-vxd config para
IS_ROOT_WLAN is 0
/wifi/realtek/rtl8192c/wlan0-vxd/wlan_disabled =1
ZTE_MMI mmi_getLedNetInfo netmode = 3, con_sta = 1,i = 4,ledsta = 0
/wifi/realtek/rtl8192c/wlan0-vxd/wlan_mode =1
iwpriv wlan0-vxd copy_mib
[ 21.945831] Miracle_debug:rtl8192cd_ioctl—10265func_off = 0

ip6tables: No chain/target/match by that name.
iwpriv wlan0-vxd set_mib hwaddr=XXXXXXXXXXXX
wlan0-vxd do not set para, exit directly
realtek rtl_start_no_gw
>
/wifi/realtek/rtl8192c/wlan0/wlan_disabled = 0
ifconfig wlan0 up
[ 22.081726] ——>rtl8192cd_open

[ 23.043853] acli: start_ss_t ss_req:0 scanning:0 is_root:1

[ 23.048645] [rtw_lock_suspend] ENTRY

[ 23.055603] gain offset : invalid data

/wifi/realtek/rtl8192c/wlan0-va0/wlan_disabled = 0
ifconfig wlan0-va0 up
[ 23.108642] ——>rtl8192cd_open

wlan0-va0 has not been added to brctl ::
brctl addif br0 wlan0-va0
[ 23.303222] device wlan0-va0 entered promiscuous mode

[ 23.307159] br0: port 1(wlan0-va0) entered forwarding state

[ 23.312408] br0: port 1(wlan0-va0) entered forwarding state

/wifi/realtek/rtl8192c/wlan0-va1/wlan_disabled = 1
/wifi/realtek/rtl8192c/wlan0-vxd/wlan_disabled = 1
[13:16:50]init.shenddddddddddddddddddd
wlan0 start success

[ 23.408477] br0: port 1(wlan0-va0) entered forwarding state

[wlan][wlan_init-3230]: ret = 0, WIFEXITED(ret)=1, WEXITSTATUS(ret) =0
[wlan][acl_set_mac-2219]: wlan0-va0 accesspolicy0 =0, accesscontrollist0=
[wlan][acl_set_mac-2220]: g_old_acl_black_mac_num =0, g_old_acl_white_mac_num=0
[wlan][set_acl_mode-2036]: accesspolicy0 :0,old_accesspolicy:
[wlan][set_accesspolicy0-2022]: set_acl_mode :iwpriv wlan0-va0 set_mib aclmode=0
[wlan][acl_set_mac-2252]: accesspolicy0 is 0
[wlan][remove_all_mac_from_acl_table_for_nonlist-1989]: cmd= iwpriv wlan0-va0 clear_acl_table
wlan0-va clear_acl_table:0
[wlan][wlan_init-3258]: Open Success
wifi_ssid_qrcode_name=/wifi/qrcode_ssid_wifikey.png
wifi_ssid_qrcode_name_bmp=/wifi/ssid_wifikey.bmp
enter the wifi_create function
qrcode_text = WIFI:T:WPA;S:WIFIPoint;P:PASSWORD
png2bmp read_png 2222222

Читайте также:  Скачать драйвера для lenovo x200s

Reading qrcode_ssid_wi .
Reading qrcode_ssid_wi o
Read OK qrcode_ssid_wi png2bmp read_png 3333333

Writing ssid_wifikey.b
OK ssid_wifikey.b
png2bmp failure is 0, success is 1, r_stdin is 1, w_stdout is 0
png2bmp end failure is 0
wifi_ssid_qrcode_name=/wifi/qrcode_ssid_wifikey.png
wifi_ssid_qrcode_name_bmp=/wifi/ssid_wifikey.bmp
enter the multi_wifi_create function
qrcode_text = WIFI:T:WPA;S:MTS8723FT_POINT;P:PASSWORD;
png2bmp read_png 2222222

Reading qrcode_multi_s .
Reading qrcode_multi_s o
Read OK qrcode_multi_s png2
[ 23.772125] zx234290_rtc_ioctl:cmd=1920230144[rtc0]arg=600.

bmp read_png 3333333

Writing multi_ssid_wif
OK multi_ssid_wif
[ 23.783935] zx234290_rtc_ioctl:0x03 = 4.

[ 23.787384] ZX234290_SET_TIMER:set timer=600, remain=345.

png2bmp failure is 0, success is 1, r_stdin is 1, w_stdout is 0
png2bmp end failure is 0
[wlan][qrcode_make-437]: zte_qrcode_create.sh wifi_create
[wlan][set_globle_charging_status-225]: usb charging is NO
[wlan][wlan_prepare_sleep-216]: wifi_status=1, charging_status=0, sta_num=0, wps_status=0
rtc-service: msg_looper process_msg in, src:0x1003, target:0x1007.
rtc-service: process_msg RTC_MSG_ADD_ALARM, src:0x1003, g_clean_flag = 0.
rtc-service: handle_alarm_del enter.
rtc-service: handle_alarm_add enter.
[wlan][create_rtc_sleep_timer-246]: sleep_rtc_timer_open=1, interval=[10]min
[wlan][disable_rtc_wakeup_timer-284]: Already disable
[wlan][handle_tsw_setting-618]: tsw is off.
[wlan][main-2009]: main thread getpid=1308
rtc-service: handle_alarm_add cur_rtc_time=1569763010.
rtc-service: handle_alarm_add pAlarm->interval is 600 ,is_utc:0.
rtc-service: alarm_restart enter.
[wlan][netlink_loop-1680]: netlink_loop param=netlink
wifi_set_netlink_event : Success
[wlan-server]create socket : Success
[wlan-server]setsockopt : Success
[wlan][netlink_loop-1688]: netlink netlink_loop getpid=1308
rtc-service: alarm_restart: set timer ok, remain_time=600, rtc_id:0x1
rtc-service: alarm_restart exit.
rtc-service: msg_looper process_msg out.
IPPortFilter have been disable two .
ZTE_MMI mmi_getLedNetInfo netmode = 3, con_sta = 1,i = 4,ledsta = 0
[ 24.013610] ZXWDT Global Count = 25, time=23450791us

Bad argument `icmpv6′
Try `ip6tables -h’ or ‘ip6tables —help’ for more information.
cmd [ip6tables -A INPUT -i -p icmpv6 —icmpv6-type echo-reply -j ACCEPT] failed
Bad argument `tcp’
Try `ip6tables -h’ or ‘ip6tables —help’ for more information.
cmd [ip6tables -t filter -A INPUT -i -p tcp —dport 80 -j DROP] failed
Bad argument `icmpv6′
Try `ip6tables -h’ or ‘ip6tables —help’ for more information.
cmd [ip6tables -t filter -A INPUT -i -p icmpv6 —icmpv6-type echo-request -j DROP] failed
iptables: Bad rule (does a matching rule exist in that chain?).
cmd [iptables -t filter -D FORWARD -p udp —dport 53 -j ACCEPT] failed
can not open file children_device_file.Warning: PortForward have been disable two
portmap_enable: 0
Warning: DMZ have been disable two
zte_router_init end
router : start to set upnp
killall: miniupnpd: no process killed
iptables: No chain/target/match by that name.
ZTE_MMI mmi_getLedNetInfo netmode = 3, con_sta = 1,i = 4,ledsta = 0
iptables v1.4.3.2: Couldn’t find target `MINIUPNPD’

Try `iptables -h’ or ‘iptables —help’ for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
Using intrapositioned negation (`—option ! this`) is deprecated in favor of extrapositioned (`! —option this`).
iptables v1.4.3.2: Couldn’t find target `MINIUPNPD’

Try `iptables -h’ or ‘iptables —help’ for more information.
iptables: No chain/target/match by that name.
24.76 13.32
proc_wan_change_v4 end
Starting ZTE FOTA apps.
mkdir: can’t create directory ‘/mnt/tmp’: File exists
fac_mode:: 1
Into fac mode!
loglevel_init, p[ 25.693145] zx234290_rtc_ioctl:cmd=1920230147[rtc3]arg=-1095672268.

rint:2, syslog:4, soctime:0
[parent control set] main thread getpid = 3464
[handle_parent_control_setting]time_limited is
rtc-service: msg_looper process_msg in, src:0x101a, target:0x1007.
rtc-service: process_msg RTC_MSG_DEL_ALARM, src:0x101a.
send_to_net_for_enable_network
mainctrl received msg usMsgCmd=0x102a, src=0x101a
[DeleteTimer_PCS]parent time control is closed, send_to_net_for_enable_network
[handle_parent_control_setting]no time is set,so delete two time[ 25.740570] ZX234290_GET_TIMER_REMAIN:cmd=1920230147.remain=598

rs
loglevel_init, print:2, syslog:4, soctime:0
/bin/sh: at-relay: not found
loglevel_init, print:2, syslog:4, soctime:0
loglevel_init, print:2, syslog:4, soctime:0
ZTE_WDT ######START######
g_mmi_temp = 4 869 1032 1736
ZTE_WDT watchdog_app = 0
ZTE_WDT start wdt_creatMsgThread
loglevel_init, pri[ 25.773712] get adc,break num =1 .

nt:2, syslog:4, soctime:0
loglevel_init, print:2, syslog:4, soctime:0
ZTE_WDT wdt_file_operate write file: sys/power/wake_lock success!!
ZTE_WDT BOOT_TESTBATTERY_MODE=
Starting telnetd.
[SNTP]data begin to rcv msg from queue 720911.
Create_Data_Thread_result SUCCESS!
data begin to rcv msg from queue 753680.
[SNTP] zte_sntp_register_id = 4122
loglevel_init, print:2, syslog:4, soctime:0
[SMS] ======/etc_rw/config/sms_
db/sms.db exist.
[ 25.815673] zx234290_rtc_ioctl:cmd=1920230144[rtc0]arg=598.
fac Server start
wait.
jdwp_service.c::jdwp_control_init():jdwp control socket started (7)
start accept.
update_type: mifi_fota
rtc-service: remain_time 598, new_remian = 0
rtc-service: adjust_time = 2
rtc-service: alarm_fix_value exit.
rtc-service: handle_alarm_del enter.
rtc-service: handle_alarm_del timer module:0x3d — 0x1, src:0x101a — 0x1003.

[ 25.854797] get adc,break num =1 .

rtc-service: alarm_restart enter.
zUfiSms_OpenDb: retry_times = 0, open_rst = 0
loglevel_init, print:2, syslog:4, soctime:0

[ 25.869567] zx234290_rtc_ioctl:0x03 = 4.

[ 25.872802] ZX234290_SET_TIMER:set timer=598, remain=343.

[ 25.878387] get adc,break num =1 .

passwd_init ret:0, reset_flag:0
ZTE_WDT BATTERY wdt_get_battery_temp_voltage temp = 1566!
ZTE_WDT wdt_file_operate write file: sys/power/wake_unlock success!!
ZTE_MMI mmi_getLedNetInfo netmode = 3, con_sta = 1,i = 4,ledsta = 0
[SMS] zUfiSms_CheckMemoryFull get ME count:8.
iptables: Bad rule (does a matching rule exist in that chain?).
cmd [iptables -t filter -D INPUT -p udp —dport 53 -j ACCEPT] failed
[ 25.940429] zx234290_rtc_ioctl:cmd=1920230147[rtc3]arg=-1095672268.

rtc-service: alarm_restart: set timer ok, remain_time=598, rtc_id:0x1
rtc-service: alarm_restart exit.
[SMS] zUfiSms_SendSmsStatusInfo unread = 1, full=0, new=0, reading=0
ZTE_MMI svr_handle_msg_smsbox_status full=0 unread=1,newsms_ind = 0,is_reading =0,unread_count = 8 .
rtc-service: alarm_restart disable alarm ok
rtc-service: alarm_restart exit.
rtc-service: msg_looper process_msg out.
rtc-service: msg_looper process_msg in, src:0x101a, target:0x1007.
rtc-service: process_msg RTC_MSG_DEL_ALARM, src:0x101a.
sms app init finis[ 25.994232] ZX234290_GET_TIMER_REMAIN:cmd=1920230147.remain=598

[ 26.102233] ZX234290_SET_TIMER:set timer=598, remain=343.

[httpshare]delfile /etc_rw/config/httpshare_db/httpshare.db OK!
iptables: Bad rule (does a matching rule exist in that chain?).
cmd [iptables -t filter -D FORWARD -p udp —dport 53 -j ACCEPT] failed
rtc-service: alarm_restart: set timer ok, remain_time=598, rtc_id:0x1
rtc-service: alarm_restart exit.
rtc-service: alarm_restart disable alarm ok
rtc-service: alarm_restart exit.
rtc-service: msg_looper process_msg out.
sms send msg cmd:5483
corem zSvr_Zpbic_Sms_Init has send init req
sms send msg cmd:5471
sms recv msg cmd:5492
sms recv msg cmd:5472
corem zSvr_Zpbic_Sms_Init has send zmena req
corem zSvr_Zpbic_Sms_Init outdate check -1226604432
sms recv msg cmd:5490
[SMScorem]zSms_RecvCscaInd databuf:»+79168999100″,145
[SMScorem]zSms_RecvCscaInd sca:+79168999100, tosca+79168999100 145
loglevel_init, print:2, syslog:4, soctime:0
[FOTA_DM][NORMAL][sig_init-740] tid:3069530112
[httpshare]zte_httpshare_db_exec_sql:CREATE TABLE IF NOT EXISTS httpshar
[ 26.240386] zx234290_rtc_ioctl:cmd=1920230147[rtc3]arg=-1095672268.

e(id INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL,ip TEXT,path TEXT) rc=0
[FOTA_DM][NORMAL][main-1192] auto polling on
[FOTA_DM][NORMAL][main-1193] poweron auto check on
rtc-service: msg_looper process_msg in, src:0x1013, target:0x1007.
rtc-service: process_msg RTC_MSG_ADD_ALARM, src:0x1013, g_clean_flag = 0.
[FOTA_DM][NORMAL][fota_dm_add_rtc_alar
[ 26.277709] ZX234290_GET_TIMER_REMAIN:cmd=1920230147.remain=598

m-602] ret=0, time interval=300
[FOTA_DM][NORMAL][main-1200] start rtc alarm

BusyBox v1.21.0-uc0 (2019-07-19 16:36:36 CST) built-in shell (ash)
Enter ‘help’ for a list of built-in commands.

#
[httpshare]zte_httpshare_call_system: [rm -rf «/etc_rw/config/mmc2»]
rtc-service: remain_time 598, new_remian = 0
rtc-service: adjust_time = 0
rtc-service: alarm_fix_value exit.
rtc-service: han[ 26.322784] zx234290_rtc_ioctl:cmd=1920230144[rtc0]arg=300.

dle_alarm_del enter.
rtc-service: handle_alarm_del timer module:0x0 — 0x1, src:0x1013 — 0x1003.
rtc-service: handle_alarm_add enter.
rtc-service: handle_alarm_add cur_rtc_time=1569763014.
rtc-service: handle_alarm_add pAlarm->interval is 300 ,is_utc:0.
rtc-service: alarm_restart enter.
[httpshare]delfile /etc_rw/config/mmc2 OK!
[zte-rtc-clock] send RTC_MSG_SET_TIME
[zte-rtc-clock] send MSG_CMD_RTC_TIME_UPDATE
[wlan][wifi_parse_msg-1463]: src_mod=[0x1001]MODULE_ID_WEB_CGI, cmd=[0x4023]MSG_CMD_RTC_TIME_UPDATE
[goahead] enter working
[ 26.380462] zx234290_rtc_ioctl:0x03 = 4.

[ 26.382904] ZX234290_SET_TIMER:set timer=300, remain=45.

rtc-service: alarm_restart: set timer ok, remain_time=300, rtc_id:0x0
rtc-service: alarm_restart exit.
rtc-service: msg_looper process_msg out.
rtc-service: msg_looper process_msg in, src:0x1001, target:0x1007.
rtc-service: process_msg RTC_MSG_SET_TIME, src:0x1001.
rtc-service: handle_set_time enter.
rtc-service: alarm_restart disable alarm ok
rtc-service: alarm_restart exit.
rtc-service: handle_alarm_del exit current_sec 1569763014.
rtc-service: msg_looper process_msg out.
[wlan][handle_tsw_setting-618]: tsw is off.
loglevel_i[ 26.489624] zx234290_rtc_ioctl:cmd=1920230147[rtc3]arg=-1095672268.

nit, print:2, syslog:4, soctime:0
wifi_statistic zUfiWifi_OpenDb: retry_times = 0, open_rst = 0
[SNTP] zte_sntp_set_process_result = success

rtc-s[ 26.509063] ZX234290_GET_TIMER_REMAIN:cmd=1920230147.remain=300

ervice: msg_looper process_msg in, src:0x100c, target:0x1007.
rtc-service: msg_looper process_msg out.
[parent control set] src_id=100c usMsgCmd=3511
[parent control set]MSG_CMD_SNTP_REPLY
[handle_parent_control_setting]time_limited is [ 26.535522] zx234290_rtc_ioctl:cmd=1920230144[rtc0]arg=300.

send_to_net_for_enable_network
[DeleteTimer_PCS]parent time control is closed, send_to_net_for_enable_network
[handle_parent_control_setting]no time is set,so delete two timers
zte_wms_db_set_parameters :: set tp_validity_period 255
can not set parameters.
sms recv msg cmd:5484
rtc-service: msg_looper process_msg in, src:0x101a, target:0x1007.
rtc-service: process_msg RTC_MSG_DEL_[ 26.575103] zx234290_rtc_ioctl:0x03 = 4.

[ 26.578704] ZX234290_SET_TIMER:set timer=300, remain=45.

ALARM, src:0x101a.
[SMS] zUfiSms_SetCmdStatus enter.
Pb app init finished, will to receive msg, msgid:557068
pb_msg_thread_proc:4111,5453
Pb recv msg cmd:5453
zPb_RecvZpbicInd para,result:1, type:1
wifi_statistic statistic_interval nv len:1, str:5
pb_msg_thread_proc:4111,5501
Pb recv msg cmd:5501
pb_msg_thread_proc:4111,5502
Pb recv msg cmd[ 26.614990] zx234290_rtc_ioctl:cmd=1920230147[rtc3]arg=-1095672268.

:5502
rtc-service: remain_time 300, new_remian = 0
rtc-service: adjust_time = 0
rtc-service: alarm_fi[ 26.630065] ZX234290_GET_TIMER_REMAIN:cmd=1920230147.remain=300

x_value exit.
rtc-service: handle_alarm_del enter.
rtc-service: handle_alarm_del timer module:0x3d — 0x0, src:0x101a -[ 26.646453] zx234290_rtc_ioctl:cmd=1920230144[rtc0]arg=300.

0x1013.
rtc-service: handle_alarm_del timer module:0x3d — 0x1, src:0x101a — 0x1003.
rtc-service: alarm_restart enter.
can not open file children_device_file.mainctrl received msg u[ 26.668243] zx234290_rtc_ioctl:0x03 = 4.

[ 26.671600] ZX234290_SET_TIMER:set timer=300, remain=45.

Источник

Поделиться с друзьями
Комп ремонт
Adblock
detector